I've got a suspected NC30 carbon hugger I'm trying to battle onto a NC35.

There are no problems doing it up chain side, but how does the back attach to the swingarm?? Please tell me its not the linkage? If so, am I missing a bracket?

PLease post up a link or some pictures so I can fit mine!

depends on who has made the hugger most of the ones I have seen and the ones we sell coming with a fitting kit

CammyGTIR wrote:I've got a suspected NC30 carbon hugger I'm trying to battle onto a NC35.

There are no problems doing it up chain side, but how does the back attach to the swingarm?? Please tell me its not the linkage? If so, am I missing a bracket?

PLease post up a link or some pictures so I can fit mine!

got one off ebay it came minus fittings so interested also . fitted it on bike using the original chainguard mounts drilled a hole at rear mount so i could use the small metal honda bracket to give it a bit more strength it has a hole predrilled on the righthand side where the hugger sits inside the pro arm behind the wheel that must accept some kind of bracketry , i drilled another and cable tied it onto pro arm around the opening for the shock .
hugger was new dunno manufacturer but would say its flimsy and the first stone that hits it will probably wreck it anyway .

I can get the brackets on their own for the ones we supply if needed if you send me a photo of the hugger I will be able to see if it will work

Gavin

Gavin jap4 wrote:I can get the brackets on their own for the ones we supply if needed if you send me a photo of the hugger I will be able to see if it will work

Gavin

gavin there a bit rolf harris will remove it and get some better pics outside if unable to identify from these

davethetrucker.I have a cf rear hugger and it has a bracket that bolts to the link mount,
you don't show a pic of your link.

hunter yes need to get better pics was in a rush hopefully get some better ones tomorow . curious about bracket you have i take it bolts onto bottom right of the hugger then behind the nut at the linkage mount on the swinging arm and bracket is just a simple L shaped with bolt holes either end

davethetrucker wrote:hunter yes need to get better pics was in a rush hopefully get some better ones tomorow . curious about bracket you have i take it bolts onto bottom right of the hugger then behind the nut at the linkage mount on the swinging arm and bracket is just a simple L shaped with bolt holes either end

I think you're right, I need some pictures of these brackets so I know the best way to fit it. The damn thing is so flimsy!

I have fitted a cf hugger of Magical Racing, it fits on the back side to swingarm with a tie-rap, there are no brackets to mount on there.

Ok guys i'v got some pics of mine,Hugger that is,but i'm having difficulties posting them here,
so if you would like to see them i can email them.
just drop me your address.