Page 1 of 3
Nc24 regulator
Posted: Tue Jun 08, 2010 11:28 pm
by pf85
Hi,
Is the NC21 regulator the same as the NC24 or are they different does anyone know?
I think my regulator is done and I know someone who has an NC21 reg for sale cheap..
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 9:37 am
by superlite
You may as well upgrade while you're at it - Honda reg rects are rubbish and expensive. R6 reg rects are the go and only need some minor mods to mount them to the subframe - and they're cheap on eBay. Wiring is straight forward, but you'll have to bin the standard Honda plug and use spade plugs. More info here:
viewtopic.php?f=22&t=9291&p=64320&hilit ... tor#p64320
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 9:59 am
by Neosophist
+1
Get an R6 Reg/Rec, you can pick them up on ebay for around £20-£25.00
The NC21/24 reg/recs are poor.
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 10:30 am
by pf85
Thanks for the replies I might go for the R6 Reg/Rec - Is there a certain year of R6 Reg/Rec which suits best?
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 3:18 pm
by hardnutdvd
i think it is 2002 onwards, can someone confirm this though before you rush an buy one.....
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 3:45 pm
by Old Painless
Mine was the 5EB,
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT
All the early R6 regulators look about the same.
Re: Nc24 regulator
Posted: Wed Jun 09, 2010 5:00 pm
by Neosophist
1999 onwards.
There have been 'unconfirmed' reports that the 99 models RR's were unreliable *shrug*
I use 2003 - 2005 models
Re: Nc24 regulator
Posted: Thu Jun 10, 2010 8:05 am
by Cammo
Neosophist wrote:
I use 2003 - 2005 models

Re: Nc24 regulator
Posted: Thu Jun 10, 2010 3:50 pm
by pf85
Im about to buy a YAMAHA R6 5SL regulator- this should work ok with my 1987 NC24 then?
Model Num: SH713AA
Re: Nc24 regulator
Posted: Fri Jun 11, 2010 12:16 pm
by Neosophist
pf85 wrote:Im about to buy a YAMAHA R6 5SL regulator- this should work ok with my 1987 NC24 then?
Model Num: SH713AA
Yep thats the one.