looking for the length measurment of the spacer that goes between the fairing lower and the frame. The one with the long bolt. Can't find one, and it will take a while for shipping
any help appreciated, thanks.

More details needed mate? Is it a standard part?

I usually make up all sorts of basic spacers (that aren't load bearing) by hacksawing up alloy tube. You can pick it up from hardware stores cheaply.

Cammo wrote:More details needed mate? Is it a standard part?
I usually make up all sorts of basic spacers (that aren't load bearing) by hacksawing up alloy tube. You can pick it up from hardware stores cheaply.

I plan on it, just wanted to know how long the stocker is. It's the one that sleeves down to go through the grommet in the top of the lower. Just went from track skins to street, and the spacers and bolt went walkabout

I can't help mate, both my bikes have track fairings and only use dzus fasteners (no spacers) on the lowers.

Think you mean the cotton reel type spacer that goes either side of the lower fairing and locates the main fairing loop bracket. I got two from a member on here Geoff33.

Good luck
Kris

Thanks guys, but it's part # 64517-mr8-000 on page 58 (F-31) of the parts fiche I have downloaded.

Thanks, got it. Parts came home, really need tp clean up a bit