My Baby's got to go....ideas please.
Posted: Mon Apr 19, 2010 2:01 pm
Hi,
i will cut to the chase, well i will try!
purchased 91 RWB UK NC30 from my boss back in august last year.
mileage 16,041
bike had been sat in his garage since 2003, he had owned since 93.
laquer started to peel on tank and 5p size dent, no scratches,no rust,corrosion, this impefection on the tank really is the only downside to the bodywork, all panels are original and all are nothing shy of MINT.
the bike has not been abused, tampered with at all its all original. no cut undertray, carbon indi's, annodised pegs or any of that crap! undertray not been cut
only mod is a GIBSON can and what i believe to be aftermarket half system.
i brought the bike with flat battery etc etc.
i spent £400 receipt to prove, on plugs,battery,filters, fraont and rear braideds,new oil, coolant, brake fluid and a carb "service"
i say "service" as it was a MX garage and i dont think it was done properly. started fine when i came back but just wont fire now, probably killed the plugs or something.
i also went mad buying bits for it and have accumulated the below
full ETHOS system with carbon can, MINT not fitted still in box
full set of genuine RWB panels,cant be described as moint next to the originals but they are her "winter clothes" so to speak, still very tidy though.
MINT rear caliper,one on bike is mint i just got carried away
full set gold nissins with lines for the front, again nothing wrong with ones on bike i just brought these as they were gold!
brand new chain guard still in honda packaging!
VGC ZXR forks (thought about a conversion)
another full set of genuine mix and match panels
rear paddock
all kinds of original bits and bobs, far tou much to list but will do soon.
oh and a full single seat rear end, needs painting but in good condition.
anyway. i havent even rode it
combination of no test and a fear of not wanting to total it. i had every intention of restoring/modding then just getting another one to hone the skills on!
Mrs has now informed me there will be a new baby in my life
so gone are my dreams of owning a mint RWB UK NC30 in the living room as a showpiece
so as you guys are the experts i thought id sound you out for the best way to move her on and what to look for really,i know it takes 9months for a baby to arrive but it takes 2mins for an italian mrs to decide the bike goes so its gotta go.
ideally i want to sell verything as a job lot, but i will definatley not break the bike, may sell spares seperatey but not until the bike is gone.
now i know your going to want pics so for those who are interested msg me a e-mail and i will knock them across.
i absolutley gutted guys, i mean big time. was so chuffed to have a UK one and now i cant even have one at all.
i am in Farnborough Hants so if anybody wants to take a look give me a shout.
MODS!!! i didnt put this in the for sale section as i am lookingf for advice first and then i wil post up with pics details etc.
thanks people - he says while staring lovingly/teary eyed at the picture on my desk of the VFR.
i will cut to the chase, well i will try!
purchased 91 RWB UK NC30 from my boss back in august last year.
mileage 16,041
bike had been sat in his garage since 2003, he had owned since 93.
laquer started to peel on tank and 5p size dent, no scratches,no rust,corrosion, this impefection on the tank really is the only downside to the bodywork, all panels are original and all are nothing shy of MINT.
the bike has not been abused, tampered with at all its all original. no cut undertray, carbon indi's, annodised pegs or any of that crap! undertray not been cut
only mod is a GIBSON can and what i believe to be aftermarket half system.
i brought the bike with flat battery etc etc.
i spent £400 receipt to prove, on plugs,battery,filters, fraont and rear braideds,new oil, coolant, brake fluid and a carb "service"
i say "service" as it was a MX garage and i dont think it was done properly. started fine when i came back but just wont fire now, probably killed the plugs or something.
i also went mad buying bits for it and have accumulated the below
full ETHOS system with carbon can, MINT not fitted still in box
full set of genuine RWB panels,cant be described as moint next to the originals but they are her "winter clothes" so to speak, still very tidy though.
MINT rear caliper,one on bike is mint i just got carried away
full set gold nissins with lines for the front, again nothing wrong with ones on bike i just brought these as they were gold!
brand new chain guard still in honda packaging!
VGC ZXR forks (thought about a conversion)
another full set of genuine mix and match panels
rear paddock
all kinds of original bits and bobs, far tou much to list but will do soon.
oh and a full single seat rear end, needs painting but in good condition.
anyway. i havent even rode it

Mrs has now informed me there will be a new baby in my life

so as you guys are the experts i thought id sound you out for the best way to move her on and what to look for really,i know it takes 9months for a baby to arrive but it takes 2mins for an italian mrs to decide the bike goes so its gotta go.
ideally i want to sell verything as a job lot, but i will definatley not break the bike, may sell spares seperatey but not until the bike is gone.
now i know your going to want pics so for those who are interested msg me a e-mail and i will knock them across.
i absolutley gutted guys, i mean big time. was so chuffed to have a UK one and now i cant even have one at all.
i am in Farnborough Hants so if anybody wants to take a look give me a shout.
MODS!!! i didnt put this in the for sale section as i am lookingf for advice first and then i wil post up with pics details etc.
thanks people - he says while staring lovingly/teary eyed at the picture on my desk of the VFR.