Hi there

im abit stuck with getting bodywork for my fzr 4001wg, tried the 3tj race bodywork but theres no room for the clocks. so i was wondering what other conversions i could use and would look ok is?
r6 bodywork seems to be popular but is there alot of work to this conversion?
any other ideas??

hi m8 my m8 got truimph 595 race bodywork on his and gsxr seat unit

Skidmarx do 3en bodywork

convert your own! appropriate coloured vinyl for numberboard over the light holes and fibreglass the belly pan, pretty easy! mines flown through scrutineering like that!

cheers ill look up the 595 bodywork.
No can do with mine its in bits!!
but cheers for the tips tho :)
got the bike cheap, quite abit of crash damage on it, no recoverable plastics!!

Do you have any spare bits for the fzr Taggy??
im looking for a de-restrictor, like the m max one?
unless you had another way of overridding the speed de restrictor?

did look into doing the back of the clocks but not got round to testing the theory yet! busy trying to build a bike and sort race fairings out! have a few bits knocking about but no mmax though, let me know what u need and i can have a look!

ideal!! will you be racing at anglesey at all?
Looking for some race tyres if you have some part worn ones or know of any good deals about?
otherwise i just have the same problem as you trying to sort a race fairing out!

i'm running 17inch rears so if i had any spare they wont do you any good! sorry!
fronts will be easier for you to get hold of once the season starts, 400 and 600's use the 120 front but 18in rears are going to be more difficult!

Hi This has been on ebay for months and not sold so he may do a deal.

http://cgi.ebay.co.uk/Yamaha-FZR-400-ra ... 19b83970da