My NC30 is completed!
Posted: Mon Dec 14, 2009 7:03 pm
After coming off last September, Ive slowly been rebuilding my VFR back up better than ever and this weekend went up and down the drive on it! I think its ready for its MOT! Just lacking the dosh around the festive period, though I suppose at least there isnt sun teasing me!
Unfortunately when fitting the fuel tap rebuild, I left the tank upside down overnight and the small amount of fuel found its way out the cap and under the paintwork.. Its bubbled a lot and wont really go awa, so I think thats going to need re-doing!
Im missing the overall pictures, so will have to get some uploaded tomorrow..
Bit of info includes
Honda VTR1000 SP2 Paintjob by Cordwells
Powdercoated wheels
Powdercoated Fork legs
Powdercoated Yokes
Powdercoated Sidestand
Powdercoated Footpegs
Anodised Fork Adjusters
Rebuilt forks with new seals and oil
Replaced pads all round
Replaced air filter
Replaced spark plugs
Red coloured rear braided hose
Tastynuts Fairing bolts
Tastynuts bar ends
Tyga endcan
Replacement studs, nuts and gaskets
Bridgestone BT-090's
Tinted screen
Red rim tape
Replacement front wheel
Renthal grips
Fuel tap rebuild
I can't remember anything else so that will have to do!
Cheers
Tom
Unfortunately when fitting the fuel tap rebuild, I left the tank upside down overnight and the small amount of fuel found its way out the cap and under the paintwork.. Its bubbled a lot and wont really go awa, so I think thats going to need re-doing!

Im missing the overall pictures, so will have to get some uploaded tomorrow..
Bit of info includes
Honda VTR1000 SP2 Paintjob by Cordwells
Powdercoated wheels
Powdercoated Fork legs
Powdercoated Yokes
Powdercoated Sidestand
Powdercoated Footpegs
Anodised Fork Adjusters
Rebuilt forks with new seals and oil
Replaced pads all round
Replaced air filter
Replaced spark plugs
Red coloured rear braided hose
Tastynuts Fairing bolts
Tastynuts bar ends
Tyga endcan
Replacement studs, nuts and gaskets
Bridgestone BT-090's
Tinted screen
Red rim tape
Replacement front wheel
Renthal grips
Fuel tap rebuild
I can't remember anything else so that will have to do!
Cheers
Tom