Hi does anyone know the correct PCD for the 3 bolt holes on the NC23

ive measured mine and im gettin 74mm PCD

however im trying to find an exhaust from ebay to bolt straight on

does anybody know if the PCD on any other bikes will fit

Any info to help would be great, cheers Tom

I was trying to find this out before I bought a can for my NC23. Eventually bought a brand new one designed for the bike. I'm sure somebody said some earlier ZX6-R cans are very close and require a very small amount of filing of the flange on the headers.

I assume you're after a 2nd hand one but there are a few companies who still make cans for the NC23.

tom_04 wrote: however im trying to find an exhaust from ebay to bolt straight on

does anybody know if the PCD on any other bikes will fit

The obvious choices would be nc29 and rvf400. They will both fit (but rvf cans were designed for the left side of the bike - badges etc)

thnks for the advice, ive also found a company tht make aftermarket cans to suit bike models, i had no joy finding any other bike fitments that fit, it seems that most bikes pcd are around 77 - 78 mm,

zx7r is close.your will have to file the holes out a bit,but the other easy option which nobady ever realises is get a billet ali ended bolt section can and provided the strap looks about right (or if its stainless/ali you can polish the band marks out) just get the end cap set right,mark the base up where the holes are,drill them and tap the threads.
one easy fitting can just make sure its ali bolt on end.
i had a zx7 that would go on but had the snout looking a bit out.
just get ya measurements right!!

the 3 bolts are annoying i didnt bother buying a new can for mine my mate just so happened to have a mtc can for my nc23 so i got that off him for £20 bargain, but still wasn't happy so i made the mtc into a stubby :D its now 8 and a half inch long and sounds fookin awesome when i open her up :)

i have a can that came off an nc29 for sale, get in touch if your interested .

I believe the bolt size is the same for the RVF can and we can badge the TYGA carbon can either side to suit the model