I'm sure this topics been raised before but I couldn't find anything in the archives so thought I'd ask for assistance.

I have a number of repairs t do on my bike but the first job is to tackle the fork seals.
Does anyone have insructions/ workshop manual/ advice on how to do this job?
So far all I've found is tech specs but could really do with some step by step instructions.
Wondered if the forks may be the same as a RGV250?

Send me your email and I will send the step by step guide we put together.

guide sent. Let me know how you find it.

Thanks Vivo, all received. I'm guessing the USD forks are similar to doing normal fork seals?

Any chance i can get a copy of that, will definetely be usefull....if you don't mind

Send me your email and it's yours

The forks are now stripped down using Vivo's instructions and now waiting for the parts to turn up.

Thanks again for the info Vivo.

No worries m8.

Mattley, check your inbox, email sent.

your a star

Have now replaced th seals and re-assembled the forks as pr Vivo's instructions (thanks again Vivo).
Only thing I'm still unsure of is the air gap thing. I put 390ml of oil in each leg and screwed the top on as per instructions but have no idea how to check air gap.

Can anyone shed any light on this?