hello can anyone tell me if the genesis use's the same hearace bearings as the later fzr's

cheers martyn

If you take the top yoke off you might be able to see the bearing number which should tell you (or a bearing supplier) which ones you have. If you still can't see the code you'll need to undo the tensioner and locking rings with a C-spanner. If you don't have a c-spanner get one before you start.

TBH most Yamaha's are the same but I can't say for certain. Course you could have a look on Wemoto

Martin head race bearings all the same for fzr400/r through to fzr600/ r

I supply the right ones and £25 plus postage £2.50

If you want a set i am ordering some tommorrow for a 3en2 shaft.