has any1 got 1 or know any1 who make them, theres a guy on ebay but thats only to do the swingarm and theres 2 other smaller ones (dont really wanna use a drift cause iv had new nut n dont wanna fook em up) cheers :D

Hiya, i made mine out of a small bore scafold pipe. i just cut the shape out with a hacksaw then filled it so that the edges were square.
Cheers
Ian

yayoboy wrote:has any1 got 1 or know any1 who make them, theres a guy on ebay but thats only to do the swingarm and theres 2 other smaller ones (dont really wanna use a drift cause iv had new nut n dont wanna fook em up) cheers :D

If it's the same guy on ebay I'm thinking of he'll make them up for any size.

Druid

Gazzahh on here has made them and I think he sells them on the bay too.

Top quality bits of kit...

yeah they look very well made but i dont really wanna fork out prob £50 for a one use tool, i think im gonna butcher an old socket, i think that'll work

I made one out of an old 22mm socket for the engine mounts and 25mm for the swingarm. Used a marker to get the correct dimensions, put the socket in the bench vise, and used a cut off wheel (grinder) to trim out the parts in between. Worked fine getting them off, we'll see how they work putting them on when the bolts have to be torqued down.

I can supply the proper Honda double ended peg spanner for £25...

r.oliver(at)mtxnet.co.uk