My RVF thread
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
aaron0288
- Settled in member
- Posts: 140
- Joined: Wed Apr 30, 2008 5:28 pm
- Bike owned: NC30
- Location: Beccles, Suffolk
Re: My RVF thread
Yes, I know that, just wondered if you had anymore?tanuki wrote:If you look through the thread there are loads of pics..
If there's one thing I've learned, it's that life is one crushing defeat after another, until you just wish Flanders was dead.
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: My RVF thread
You mean the pillion peg?
If you look at the pics on page one you will see what I had to do...you have to use an aftermarket coolant bottle as there is no room for the folding peg and that and you will need to use an NC30 exhaust hanger which will have to be moved up the subframe closer to the rear lights which may mean the strap covers over whatever brand name is on your can, I goy round this by making a little bracket out of ally which you can also see in the pics. If I remember correctly you can use 2 of the original mounting points but you will have to drill some holes into the subframe.
All in all it only took a day to do staring from scratch.
If you look at the pics on page one you will see what I had to do...you have to use an aftermarket coolant bottle as there is no room for the folding peg and that and you will need to use an NC30 exhaust hanger which will have to be moved up the subframe closer to the rear lights which may mean the strap covers over whatever brand name is on your can, I goy round this by making a little bracket out of ally which you can also see in the pics. If I remember correctly you can use 2 of the original mounting points but you will have to drill some holes into the subframe.
All in all it only took a day to do staring from scratch.