Page 9 of 13
Re: I think this is a cracking wheel nut idea!
Posted: Fri Mar 04, 2011 8:58 pm
by Drunkn Munky
porndoguk wrote:geoff33 wrote:Probably £20 a piece, depends how many are wanted really.
save me one for the end of the month as im am absolutley skint for legitimate reason =
Your go blind
Re: I think this is a cracking wheel nut idea!
Posted: Fri Mar 04, 2011 9:48 pm
by porndoguk
can i get a free one if i show pics,
or you could save donate to "save ricky from boobyness fund"
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 07, 2011 9:16 pm
by Drunkn Munky
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 07, 2011 10:19 pm
by reverse cylinder jim
That looks nice Tony, does it feel much lighter tahn a standard NC one?
James
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 07, 2011 10:27 pm
by Drunkn Munky
Dont have a standard one to compare with but it is very light, just need a spacer and nut made now, or get an rs wheel
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 07, 2011 10:32 pm
by reverse cylinder jim
Has it come with two different nuts i.e one flat faced for standard wheel and one recessed to accept an RS250 Dymag like the one im using?
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 07, 2011 10:35 pm
by Drunkn Munky
No it only come with the dished spacer wheel nut combo so need to get a flat one
Re: I think this is a cracking wheel nut idea!
Posted: Fri Mar 18, 2011 12:59 pm
by tanto
What's the latest on the wheel nut design? Was it to be as per the original, or a 46mm nut?
I think this is a cracking wheel nut idea!
Posted: Sun Mar 27, 2011 2:39 pm
by code2006
Any update on this guys?
Re: I think this is a cracking wheel nut idea!
Posted: Mon Mar 28, 2011 12:54 am
by Foximus
just to be sure... you guys are getting these nuts with the flat mounting flange for a honda rim correct?
I'm going to a Ducati rim so I'll be needing the tapered nut like 3upRacings.... I already sent him a Email, but wondering what you guys were doing as well.
Also I'm in the US, and finding parts for these is hard as all hell.
(side note, know anyone in the US that would have a swing arm for me?)
