Page 3 of 6
					
				Re: R1 Master cylinder for the front?
				Posted: Thu Sep 06, 2012 2:09 pm
				by Evilchicken0
				The 3en1 was the first road model with an exup, the 3en2 was an update of that model, but the nc30 came out that year too, then the 3TJ immediately after that so I guess they didn't sell so many originally.

 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Thu Sep 06, 2012 2:38 pm
				by Fzr400Welch
				Just wait for log book then defo find out which model it is haha and i love my fzr but its getting sprayed all black
			 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Thu Sep 06, 2012 5:34 pm
				by Evilchicken0
				Don't spray it all black  
 
 
It will look like it's been in an accident bodged back together and the bikes value will drop by half
 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Thu Sep 06, 2012 7:59 pm
				by Taggyd
				i had a brembo m/c with 16 on it (16mm?) on my 3tj, not a clue what it was off but the guy i got it off worked in a yamaha main stealers. worked well at any rate with standard calipers.  
 
 
should have kept it for the track bike i guess but it got me a few more quid for the bike so oh well....
 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 5:42 am
				by willandrip
				Evilchicken0 wrote:Don't spray it all black  
 
 
It will look like it's been in an accident bodged back together and the bikes value will drop by half
 
The words "it's been in" are superfluous to requirements in this quotation !!!!!!!!
 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 12:43 pm
				by Fzr400Welch
				What colour do you recommend doing it? As it needs a spray job as its all flaking off really badly.
How much are the 3EN2 worth?
			 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 2:08 pm
				by Kayla850
				Fzr400Welch wrote:How much are the 3EN2 worth?
Good standard ones can fetch £1000 or so and bodged/modified ones probably around half that.
 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 2:29 pm
				by willandrip
				Evilchicken0 wrote:The 3en1 was the first road model with an exup, the 3en2 was an update of that model, but the nc30 came out that year too, then the 3TJ immediately after that so I guess they didn't sell so many originally.

 
Christ,look at all them new novice jackets.
In my day everyone's were in tatters by the 2nd lap!!!!
 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 2:33 pm
				by Fzr400Welch
				So its best to get it in original colours if possible? Just hard as someone has tryed spraying the tank there self.
I paid £400 for mine, is that about right?
			 
			
					
				Re: R1 Master cylinder for the front?
				Posted: Fri Sep 07, 2012 2:39 pm
				by willandrip
				Fzr400Welch wrote:What colour do you recommend doing it? As it needs a spray job as its all flaking off really badly.
How much are the 3EN2 worth?
This looks quite nice but probably not to everybody's liking.
 
This is up for £800 and has been for a while and has been tidily done.The man spent about £1200 on it.
Trouble is location or I would have had it.

.
Here a few that might give you some ideas (blatently robbed from others) .Mind there's some of the "other things" on there.
http://moto-works.bravejournal.com/