They look real nice.
If you can sort footpegs out a number of people on here are after getting the Beet pegs remade.
Ive got some Ti clutch spring spacers somewhere, if i can find them out you could throw a set in.

I have already made the pegs and levers, they are a generic design I use for my rearsets. Basically the same as the ones I made for the zxr750:

MartinArcher wrote:I have already made the pegs and levers, they are a generic design I use for my rearsets. Basically the same as the ones I made for the zxr750:

dayummm, how much you selling these for? would love a set of adjustable s, am quite a tall person and get cramp after like an hour of riding on the 400 :/

The adjustable rearsets are for a zxr750, not the gsxr400.
Here is the torque arm before I send it off to be anodised:

Beet pegs are slightly different to normal as the mounting hole is off center and the peg then sits in a cutout to stop the peg turning,
People fit generic due to this offset.
Is the torque arm cut from solid? would be nice if you do a matching exhaust hanger.

I have 2 types of pegs, ones that I have turned and knurled that the levers sit on and some that I have turned and then milled a pattern on to give grip. I only do the second set for myself as they take quite a while to machine.
The torque arm was machined from one piece.