Yup these are the 30 ones

So what else of the hrc kit do you have?

Not much to be honest just rads and full carb kit but will keep looking for stuff

There is a guy here selling an HRC spec race bike:
http://www.trademe.co.nz/motors/motorbi ... 795125.htm

Pretty expensive (especially for a race bike but bear in mind that bike cost more in NZ than the UK!) but if the spec is what he say it is, then that is one very nice motor!

Looks like it could be the real deal, nice bike.

Nice one yakama!

So you've got
Rads
Pistons
Rods
Carb kit

What else do you need for an SS/SP bike, or an F3 bike?

Ive also got the HRC rev counter and convertor and HRC temp gauge and HRC oil cooler setup. Ive got a phoenix exhaust which is very similar to the HRC one but in mild steel and also an ignitech CDI with HRC map.

Dont think I need much for a SS/SP bike but for an F3 bike I would need Camshafts, gearbox, rear shock (Although I have an F3 shock for the NC23 which I think could be modified to fit), rear axle and Magtek wheels, genuine CDI, bodywork, so quite a lot left to find!!

Theres been a F3 shock floating about on yahoo a while back

Yeah that was an NC23 shock same as I have but modded to fit the NC30

That's a nice lot of hrc parts you have!

I reckon the 30 hrc cdi would be possibly the hardest part to find. I've only ever seen one for sale.

Yakama wrote:Ive got a phoenix exhaust which is very similar to the HRC one but in mild steel

The hrc systems are mild steel also.