Mark,

It belongs to a danish guy called Finn, he's a good friend of Thorstens. And one of the only I know who keep their spare Rc in the bedroom

Ronni

CMSMJ1 wrote:One of Durbhans?

I reckon Michaels is going to be the law when it comes to injected V4s...I want to get a flight over just to have a look at it for an hour and talk shit about motos...what a pukka bike

Yep, Durbahn, it is truly droolworthy. GSXR750 FI throttle bodies IIRC[1]. Unfortunately an RC30 is a little bit out of my budget atm but I can dream.

D

[1] And I thought I was mad for considering modifying Hayabusa throttle bodies to fit an SV650...

RonniB wrote:Mark,

It belongs to a danish guy called Finn, he's a good friend of Thorstens. And one of the only I know who keep their spare Rc in the bedroom

Ronni

I'd keep all mine in the bedroom if I could.....

As it stands...the garage will have to do!

You Scandinavian guys have a good V4 setup going on over there.

I think a V4s on tour might have to be had to arrange a few ales at a convenient location..


Of course, I'd wash no9 and make sure he was tip top otherwise a thousand miles of Euro travel might be too much!

CMSMJ1 wrote:I think a V4s on tour might have to be had to arrange a few ales at a convenient location..

Sounds a plan! That's what 3 hours to Dover, 4 hours Calais to Hamburg? Start early, we can be in the pub by 6.

Druid

CMSMJ1 wrote:

RonniB wrote:Mark,

It belongs to a danish guy called Finn, he's a good friend of Thorstens. And one of the only I know who keep their spare Rc in the bedroom

Ronni

I'd keep all mine in the bedroom if I could.....

As it stands...the garage will have to do!

You Scandinavian guys have a good V4 setup going on over there.

I think a V4s on tour might have to be had to arrange a few ales at a convenient location..


Of course, I'd wash no9 and make sure he was tip top otherwise a thousand miles of Euro travel might be too much!

You are more than welcome.

And yes, we have a nice little community overhere, where everyone knows everyone.
By the way we have a little brake project involving ISR RC30 kit parts, meaning that my rear brake will lose a good few pounds over winter (at a price...)

Ronni

rear brake disk like Thorstens one with the isr caliper?

Michael

Yes Michael,

ISR mini caliper, 190mm ISR steel disc and CNC'ed bracket. I can ask the guy heading up the project if we can have another one made, but it's around 400 euro and payment in advance.

Ronni

RonniB:
Alle the custom made brackets for the ISR caliber has ben sold, and the order to ISR has been send, so maybe it is to late

yes, I know.., I'll ask Jan if it's totally out of the question.