Evilchicken0 wrote:Those plates are for 3tj / TCat or Foxeye conversion where the frame bolts to the head. Your frame bolts to the gearbox.

brillent cheers mate :D one last question will the engine cradle still fit ok with the 4tv engine in situ?

many thanks Ollie

I don't think so, or at least not a simple bolt in.

thanks mate makes no odds either way as shes probable going to end up street fightered just thought id ask

Oh a shitfighter ... thats ... adequate.

Have a look at the early fazer 600 engine, don't know where the engine mounts but it has frame rails and doesn't bolt on the head.

Evilchicken0 wrote:Oh a shitfighter ... thats ... adequate.

Have a look at the early fazer 600 engine, don't know where the engine mounts but it has frame rails and doesn't bolt on the head.

The early fazer engine has sidedraft carbs I think Boris, so probably won't fit in the FZR frame.

I'm also (fairly) sure the later 4JH/4TV engines still have the bottom engine cradle mount on the cases but I do reserve the right to be wrong!

Doh ... of course. Good ole sidedraughts

Kayla850 wrote:

Evilchicken0 wrote:Oh a shitfighter ... thats ... adequate.

Have a look at the early fazer 600 engine, don't know where the engine mounts but it has frame rails and doesn't bolt on the head.

The early fazer engine has sidedraft carbs I think Boris, so probably won't fit in the FZR frame.

I'm also (fairly) sure the later 4JH/4TV engines still have the bottom engine cradle mount on the cases but I do reserve the right to be wrong!

Yeah I've deffo seen a 600 with the front cradle mounts there but not drilled, cant remember what it was on tho sorry.

Yup TCat and Foxeye have mounting pilots on the front top of the gearbox