Benny, I cannot access EBay from work anymore (bloody fun police) so cannot check the dimensions on the link I put up to the tool on EBay. Having said that I grabed my pucker Honda item on the way out this morning and have just measured it as below...



CAVEAT - this was measured using a (ahem) highly calibrated....plastic office rule, so give or take a mm but it should at least let you know if it is the right size.

I didn't have an Abba stand, so when I rebuilt my bike and got to the swingarm (well I stripped to the frame to replace the engine so yeah...) I jacked up the entire bike, then put a plank across two jacks and put that under the sump - job done!