Re: 1/4 turn fastener tab
Posted: Mon Sep 09, 2013 4:11 am
they also use a different "thread" to grip onto the back plate.krisztian_andre wrote:I measured the original ones and they are 6x13mm, same as the ones on ebay. Do you mean the backplate is different?Cammo wrote:The original honda dzus fasteners (if that's what you're replacing) are a unique size, the kit above is a different size so unless you replace all 4 you'll have 1 odd looking fastener.
i just put a set of these through my bike http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 1166806851