Page 2 of 2

Re: help finding parts nc21

Posted: Tue Dec 04, 2012 6:22 pm
by lukiooo
Thanks for your help think I risk it with a cheap one!

It was ran up to just below the red line it has never worked but by testin the fan on the frame I know this works and the fan should have kicked in when it's just below the red line.

Re: help finding parts nc21

Posted: Wed Dec 05, 2012 9:27 am
by Neosophist
lukiooo wrote:Thanks for your help think I risk it with a cheap one!

It was ran up to just below the red line it has never worked but by testin the fan on the frame I know this works and the fan should have kicked in when it's just below the red line.
Yes it should have.

The best test would be a pan of boiling water and a multimeter but it sounds safe to say that is is dead.

There was somebody a while ago who "tested" the fan (not the switch) by earhing to the frame and ordered a new ones as he thought it was dead.. wasnt letting it get hot enough aha!

Pricey part but important.