rockTJ wrote: Have you ever tried 1WG systems on the 3TJ??? Only asking as I found a set of headers for a 1WG on ebay

1WG headers won't fit the 3TJ without some serious modifications. The 3TJ exhaust ports are larger and the cylinder spacing is slightly different.

hey i had the same problem with my 3tj

http://www.ebay.co.uk/itm/FZR400-FZR-40 ... _505wt_986

these are for the 3tj and are cheap considering they are a direct replacement and are brand new , the only thing is there is no exup valve

hopefully this will help

alex

alexday93 wrote:hey i had the same problem with my 3tj

http://www.ebay.co.uk/itm/FZR400-FZR-40 ... _505wt_986

these are for the 3tj and are cheap considering they are a direct replacement and are brand new , the only thing is there is no exup valve

hopefully this will help

alex

I have a 3EN2 model so these wouldn't fit would they.

Its hard to find some, i put some hole filler in the wholes to stop the blowing.

3EN1 and 3EN2 headers are the same and you can get aftermarket ones from Sandy Bike Spares

i could be totally wrong, someone correct me if i am (i'm sure there was a thread on here somewhere)

BUT i haven't heard many good revues about these pipes,
apparently the brackets that attach to the head, distort something wicked (end up looking like bananas) and after not too long split