Pilot screws without EXUP valve on 3EN2
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Pilot screws without EXUP valve on 3EN2
That sounds promising .... and good news about the bike too 

- Hogdigerdy Dog
- Site Supporter
- Posts: 545
- Joined: Mon Sep 14, 2009 6:34 pm
- Bike owned: FZR400RR 3TJ, ZX9R fighter
- Location: Dorsetshire
Re: Pilot screws without EXUP valve on 3EN2
hope it's in a fixable condition when you get it back
the little bastards need a good flogging
the little bastards need a good flogging
-
- Settled in member
- Posts: 57
- Joined: Sat May 14, 2011 7:21 pm
- Bike owned: FZR400 3EN2, FZS600 mk1, RF600
Re: Pilot screws without EXUP valve on 3EN2
Cheers for the words of evil towards villain. I've seen it now, waiting for fingerprinting before I get it back. It looks like he hit something like a kerb hard while cranked over, and it's flipped. It was apparently wedged between at garage and a wall, so I guess it's had a nice trip through the air.
Pics:
http://imageshack.us/g/254/cimg2385x.jpg/
I need, at first glance:
starter motor link gear cover
front wheel
headlights
ignition barrel, petrol tank barrel, seat lock barrel
indicators
right hand lower faring
Right rear faring
brake lights
Mirrors
screen
Nose cone probably
Nose cone sub frame probably, or some serious bending if not
fork straightening?
front disks?
front callipers?
handlebars?
But I'd guess she'll run without anything more than the link gear cover replacing, new oil and lots of easy start, and maybe the exhaust smacking about a bit and reseating, as it went down on that side. There's no cylinders poking out, or leaking coolant though.
Bizarrely, the front brake callipers and lines have been changed. I'll speak to the coppers about that I reckon, see if we can get an associate in trouble too as I can't think why else they'd take them off? They were in good nick with goodridge lines, so I guess a swop onto a mates bike.
She's sitting very low, but the front tyre is flat and also the bars have moved off the forks, so hopefully that's the only reason. The forks seem to be sitting at the right height, and look straight, although that would be surprising with the bars coming off and the giant boink in the wheel.
I'll get her back Monday/Tuesday so updates after that...
Pics:
http://imageshack.us/g/254/cimg2385x.jpg/
I need, at first glance:
starter motor link gear cover
front wheel
headlights
ignition barrel, petrol tank barrel, seat lock barrel
indicators
right hand lower faring
Right rear faring
brake lights
Mirrors
screen
Nose cone probably
Nose cone sub frame probably, or some serious bending if not
fork straightening?
front disks?
front callipers?
handlebars?
But I'd guess she'll run without anything more than the link gear cover replacing, new oil and lots of easy start, and maybe the exhaust smacking about a bit and reseating, as it went down on that side. There's no cylinders poking out, or leaking coolant though.
Bizarrely, the front brake callipers and lines have been changed. I'll speak to the coppers about that I reckon, see if we can get an associate in trouble too as I can't think why else they'd take them off? They were in good nick with goodridge lines, so I guess a swop onto a mates bike.
She's sitting very low, but the front tyre is flat and also the bars have moved off the forks, so hopefully that's the only reason. The forks seem to be sitting at the right height, and look straight, although that would be surprising with the bars coming off and the giant boink in the wheel.
I'll get her back Monday/Tuesday so updates after that...
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Pilot screws without EXUP valve on 3EN2
Really I think it's time to let that one go. See what the insurance offer.
The wheel has taken a hard bang, which looks like it will probably have go into the headstock. The starter motor cover will mean oil loss and you know how long the engine ran like that.
The wheel has taken a hard bang, which looks like it will probably have go into the headstock. The starter motor cover will mean oil loss and you know how long the engine ran like that.
-
- Settled in member
- Posts: 57
- Joined: Sat May 14, 2011 7:21 pm
- Bike owned: FZR400 3EN2, FZS600 mk1, RF600
Re: Pilot screws without EXUP valve on 3EN2
3rd party only unfortunately. I live in da ghetto.
-
- Site Supporter
- Posts: 722
- Joined: Thu May 15, 2008 2:03 pm
- Bike owned: fzr 400 3tj x 2, cbr900rrs
- Location: Ironbridge, uk
Re: Pilot screws without EXUP valve on 3EN2
got a front rim you can have for postage plus £5 for removing my track tyre (3en1 are the same as 3en2?) if you do decide to put it back together. think ive got a 3en2 front brace as well.
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Pilot screws without EXUP valve on 3EN2
I'll join in with Taggy I've got both fairing lower from a black 3en1 and a fuel tank cowl from a 3en2.
I think Phil Norton might have 3en2 rear panels.
I'd forget trying to find a headlight fairing either stick yours back together with plastex or fit a FZR600 unit with the headlight and frame from the same bike
I think Phil Norton might have 3en2 rear panels.
I'd forget trying to find a headlight fairing either stick yours back together with plastex or fit a FZR600 unit with the headlight and frame from the same bike
-
- Settled in member
- Posts: 57
- Joined: Sat May 14, 2011 7:21 pm
- Bike owned: FZR400 3EN2, FZS600 mk1, RF600
Re: Pilot screws without EXUP valve on 3EN2
The rim sounds awesome Taggy, if you let me know payment details I'll send it over with my address:D
Evil, The tank cover I think is ok, as should the left lower I think. The right lower I'll need... how much do you want for it? Let me know, and once I've got the bike back and confirmed I don't need the other bits you've mentioned we'll sort that:)
Evil, will a nose cone sub frame and nose cone fit from a 600 fit straight on and line up with the lowers, or is there a lot of faffing about? I don't think I'll be able to repair the old one, there seems to be quite a lot missing.
Thanks a lot people! :)
Evil, The tank cover I think is ok, as should the left lower I think. The right lower I'll need... how much do you want for it? Let me know, and once I've got the bike back and confirmed I don't need the other bits you've mentioned we'll sort that:)
Evil, will a nose cone sub frame and nose cone fit from a 600 fit straight on and line up with the lowers, or is there a lot of faffing about? I don't think I'll be able to repair the old one, there seems to be quite a lot missing.
Thanks a lot people! :)
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Pilot screws without EXUP valve on 3EN2
The 600 lowers look the same as the 400 so I'd say the 600 fairing farame and lights will fit. At tleast you'll have H4 bulbs 

-
- Settled in member
- Posts: 57
- Joined: Sat May 14, 2011 7:21 pm
- Bike owned: FZR400 3EN2, FZS600 mk1, RF600
Re: Pilot screws without EXUP valve on 3EN2
I have the bike now and have had a proper look in the light, and removed various bits. There's more I'd need to replace that isn't on my list. There is determination to get her back on the road, and there is being fucking stupid. This would be fucking stupid. She's dead.
On the plus side, scumbag is still in hospital with broken leg, arm and internal injuries. Copper is coming round tonight for the full story, but it sounds like he missed a wall by a couple of feet at fatal speed.
On the plus side, scumbag is still in hospital with broken leg, arm and internal injuries. Copper is coming round tonight for the full story, but it sounds like he missed a wall by a couple of feet at fatal speed.