Page 2 of 2
Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 3:14 am
by Neosophist
Sell the bike
Have a look at this
http://images.cmsnl.com/img/partslists/ ... 2_20ed.gif
Part number 20 is the o-ring on that oil feed pipe.
Make: Honda
OEM#: 91301-PC9-003
Product#: 91301PC9003
There is one each end
Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 10:27 am
by sp00ka
Just spoke to davidsliver before I seen that post

the bloke had a right game finding this part but he reckons that the part is 7.7 x 2.3 shall I tell home that's wrong and get the 7.8 x 2.3 ??
I think I should sell it if there no o ring , dread to think what else might be missing

Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 10:39 am
by amorti
sp00ka wrote:Just spoke to davidsliver before I seen that post

the bloke had a right game finding this part but he reckons that the part is 7.7 x 2.3 shall I tell home that's wrong and get the 7.8 x 2.3 ??
I think I should sell it if there no o ring , dread to think what else might be missing

Do make sure there isn't one in there. Have a poke about with a pick or screwdriver. Many people end up fitting exhaust header gaskets over the old ones as they're so coked up you can't see them. At that point they don't last five minutes.
Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 11:21 am
by Neosophist
If there was no o-ring on it then the oil would be pouring out, there should be an oring somewhere, either on the pipe or in the hole, it sounds just worn.
I mean sell it because it sounds like this bike has been neglected and you'll spend lots of time and money fixing everything.
Just order the part number i gave you, its the correct one.
Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 2:09 pm
by sp00ka
I never checked if it was on the pipe :-/
Ok I'll reorder that one ,
I'll let u no how it goes , :)
Re: LEAK UPDATE NC24 PLEASE HELP
Posted: Tue Apr 19, 2011 2:15 pm
by sp00ka
amorti wrote:sp00ka wrote:Just spoke to davidsliver before I seen that post

the bloke had a right game finding this part but he reckons that the part is 7.7 x 2.3 shall I tell home that's wrong and get the 7.8 x 2.3 ??
I think I should sell it if there no o ring , dread to think what else might be missing

Do make sure there isn't one in there. Have a poke about with a pick or screwdriver. Many people end up fitting exhaust header gaskets over the old ones as they're so coked up you can't see them. At that point they don't last five minutes.
Cheers mate I'll double check