Page 2 of 2

Re: NC35 fairings on NC30

Posted: Tue Jan 11, 2011 3:26 pm
by uber pikey
BillingCBR wrote:Did you get a mudguard with the panels? If it's any good and you want to get rid, let me know :up:
I did get the fender but until I get it delivered I have no idea the condition or price. I will let you know

Re: NC35 fairings on NC30

Posted: Tue Jan 11, 2011 3:41 pm
by CMSMJ1
You need to book a trackday at Cadwell mate....simple excuse to pop up and collect.

I was looking at them too..but I cannot be arsed changing subframes etc

Re: NC35 fairings on NC30

Posted: Fri Jan 14, 2011 7:20 pm
by uber pikey
A few questions regarding my recent purchase:

I have managed to secure a new riders seat for the rear fairing but would like to know if the rear seat is the same as the NC30's if anyone can help, will I have to buy a seat just for the RVF fairing?

Can I fit the NC30 rear lights into the RVF rear light housing?

Is the rear fairing able to be moded so that it can be fitted to the original NC30 subframe, or can I adapt the sub frame to fit both?

The nose cone will not be fitted to my bike so who's up for it? :whistle:

Curt

Re: NC35 fairings on NC30

Posted: Fri Jan 14, 2011 10:19 pm
by CMSMJ1
uber pikey wrote:A few questions regarding my recent purchase:

I have managed to secure a new riders seat for the rear fairing but would like to know if the rear seat is the same as the NC30's if anyone can help, will I have to buy a seat just for the RVF fairing?

Seat is not the same

Can I fit the NC30 rear lights into the RVF rear light housing?

No,lights are different too- you can bodge the 30's in

Is the rear fairing able to be moded so that it can be fitted to the original NC30 subframe, or can I adapt the sub frame to fit both?

The mountings are different for the seats and the RVF does not bolt up in the front..


The nose cone will not be fitted to my bike so who's up for it? :whistle:

Curt

You got a box yet dude? The local post office tell me they sent it early this week...bastards :o

Re: NC35 fairings on NC30

Posted: Sat Feb 05, 2011 1:49 pm
by uber pikey
Well my box arrived today and am pleased with the condition of the panels but am now not interested in the RVF upper panels on my bike, the rear seat unit is looking mint on the bike :drool:
so I am after a subframe and undertray for it as that's definately going on. I am after a swap for NC30 upper panels so will be posting loads up soon in the for sale section.

I was lucky with the buy as it came with the front and rear light cluster units, both air ducts for the tank, carbon fibre effect indicators(front and rear) and carbon effect brake n clutch levers, these are not going on the bike...well appart from the rear light unit :peace:

I will keep an update on the fit and prep work. I know this isn't the 'for sale' section but pm me if your interested in some bits or just watch out for them in the for sale section.