Don't need injection to have ram-air, you just have to route all the carb vents into the airbox.

On the RC24 there are two vents in the middle of the fairing that feed cool air into the middle of the V, nothing to feed cool air to the carbs though.

Druid

they feed cool air to the airbox.

anyone got a lefthand side one? I'm still after :D

sorry to say they are almost impossible to get hold of, I need the grommet that holds the duct into the frame on the right hand side. The ducts channel air into the air intake of the airbox hence ram air. Dave Silver spares have the left hand duct for £18 +vat but it doesn't come with the grommet to hold it in place in the frame and without it the duct will blow out when you're riding. I am still hunting and if I have any joy I shall be in touch.

If you have a part number for the ducts / grommets etc that'd help immensley

part number for right hand duct is 64270ml0700 for definite, part number for left hand side is 64275ml0700 I think, also try Lings Honda Spares. The grommet that fits over the end of the duct and holds it into the frame does not come with the duct however, the grommet was dis-continued by Honda which is why their impossible to get hold of however, I'm about to look into havin some made so will let you know the outcome.

Is this like a rubber grommet forming a seal beteen the duct and the frame tubes?? Any pics anyone??

My right hand duct is held on by a big metal nut? I'll take some photos if you want.

I've ordered new ones for both sides from dave silvers, £18+vat. they needed the frame number as they said theres slight differences?

I'm going to see a guy to see if he can mould replacement grommets for a reasonable price