CMSMJ1 wrote:They'll be NC30 fork bottoms

Beat me to it!

zul_cbr wrote:Thanks CMSMJ1, but the SP1/CB400 Vtec/Blade/600RR gold Nissin calipers are quite expensive here and it slightly lower than Brembo Goldline caliper. If I have the budget, for sure its Brembo

They're cheap on US ebay. I got a set of good SP1 calipers for less than USD$100 to my door.[/quote]
Whats the diff beside the nice gold colors and design ?[/quote]

Performance might be better, I got them becasue buying a set of newer calipers was cheaper than rebuilding nc30 calipers (new pistons, new seals).

Guys, may I know if the SP1,600RR3,929 caliper has the same bolts mounting dimension with NC35,92-97 900RR caliper ? If I'm going to replace it, is that a straight swap ?

From what I've seen, this NC35 using the 929 caliper without any custom bracket.

yes mate they are, i have a set of those SP-2 calipers on Rick Oliver brackets on my NC30 + coupled with the Sp-2 master cylinder = some stopping power ...