hiya,
I really like the look of those clocks, was that for the nc29 or 23?

do you have a link to the place you got them from..

LozVTR wrote:hiya,
I really like the look of those clocks, was that for the nc29 or 23?

It was for my NC29-CBR6RR conversion.

do you have a link to the place you got them from..

You can get them here - the shop where i got them won't sent to GB.

just did abit of research and theres a company on ebay who will deliver them for £170

apparently its a universal kit so will work on any bike.

LozVTR wrote: apparently its a universal kit so will work on any bike.

Yes it is. If you have any questions about the wiring - ask me

razortooth wrote:

zul_cbr wrote: is there any modifications needed to the wiring ?

I cut all the bulbs of the original wireloom and soldered it with the wires of the new speedo.

Looks like this:

thanks mate!!

i'm hunting for mine!

Hi Guys

Thanks for the info, I got a pair of shorty Pazzo levers with the brake res still attached. The res is for a CBR6 so will have to see if the brake lines fit. Does anyone on here know?

The digi clocks look the nuts will have a look at them later. Cheers again guys

1 question.....

on NC29s the red zone on RPMs starts at 14500 and ends 16.5K
most all digi clocks i have looked at dont go near that. now i dont often hit the red zone, but do like to know when i get near it.

one set i found ACER clocks let you program/set the red zone in.

what happens when you hit that on your set?