NC30 - First Ride - Fuelling issue maybe?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 - First Ride - Fuelling issue maybe?
It sounds very much like the restriction is kicking in (losing power to 2 cylinders after 5000 rpm). Mine did this once and it's not as obvious as you think, especially if you've never rridden an nc30 before!
Derestrict it (resistor method) and see how it goes.
Derestrict it (resistor method) and see how it goes.
"It's just a ride" Bill Hicks
-
Growler
- Settled in member
- Posts: 83
- Joined: Mon May 11, 2009 6:19 pm
- Location: Dundee, Scotland
- Contact:
Re: NC30 - First Ride - Fuelling issue maybe?
Cheers Stickshift... Wasn't sure if the rev range stopped at 5000rpm with the restriction but that was one of my thouights. Waiting on the restrictor coming from Rick O will let you know how it goesIt sounds very much like the restriction is kicking in (losing power to 2 cylinders after 5000 rpm). Mine did this once and it's not as obvious as you think, especially if you've never rridden an nc30 before!
Derestrict it (resistor method) and see how it goes.