done nice that badbannedbiker

Thanks...its getting an overhaul this winter, stainless exhaust w/ stubby can, different lights (buell xb12's or projectors), digital clocks, lowered gearing to aid bridge wheelies and a tidy up inc powdercoated wheels, paint and cleaner wiring loom

sound done a bit on mine today got the engine in tryed the carbs they are really tight and dont sit right gonna have another look tommorow i havent cut the frame rails gonna build it up and see what it rides like first its a really tight fit so am thinkin it will need cutting

Here is one from Ukraine - http://img.moto.kiev.ua/thumbcache/3173 ... 319497.jpg

here is a couple of pics of my project

600 engine now in
tank made to fit over carbs
subframe all tack welded ready for final welding

pics are not that good quality but gives an idea of the way im goin with my bike

did you cut the frame in the end or did you get the grinder out

i got the grinder out its very tight on the frame i think i will have to get it cut and welded but gonna see how it is on a test run when ive got the rest of the work done

looking good mate.. ive got mine together now just doing the smaller bits now...

have taken it out for test runs however it hits a never ending flat spot at about 8k.. have been speaking to lloydie who advised its defo the airbox.. despite lots of test runs and lots of combinations of air holes i still cant get it to work.. will be trying more today!!

have you done your airbox now mate?

Cool, except that seat unit looks maaaassssive!

It would nearly get in the way of your mirrors I suspect...

not started on the airbox yet might have a go at the weekend