Well totally not NC30 but it will be good to see people, just as long as i dont get dirty looks for turning up on a proper honda.

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))

Well depending on dates count me in. always up for a laugh. if my project "winter nail" is built by then i will bring that, if not then the UK spec bike with a 3/4 yamamoto and RVF carbs

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power

Dependant on when it would be I suspect Psychosomatic and I may attend, its the draw of a bacon butty you know. I run a stock engine, tyga airbox, k+n filter, rvf carbs and an ethos half system. Murray has some engine work, full system, carb tray and jetted carbs. I'll confirm with him today.

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)

CRM bring the 916 as well ill bring my monster in and we can have a ducati

put me down for this will also do the run to bmc put me down for that .never used a dyno about time i did
[quote="kevprojex"]Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)
9 paul nc 24 (nc24 std no mods scorpian can. need carbs sorting and someones got to come last in the power stakes )

one more thing hamster about your dyno results only joking nice one for sorting this out

if you sort out a date i might pop down,(im only 3-4 miles away in erdington) cant say a deffinate yes though as i work shitty 4 on 4 off shifts so may be working... NC24 with scorpian can and some seriuosly out of balance carbs!!!! popping...spitting...flaming on the over run!!!!

Go on then, date dependant me and Murray are in too.

1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)
9 paul nc 24 (nc24 std no mods scorpian can. need carbs sorting and someones got to come last in the power stakes )
10. Riley (Stock engine, Tyga air box, K+n filter, Rvf carbs, ethos half system)
11. Psychosomatic88 (Carb tray, fettled carbs [previous owner], some engine work [previous owner], Stainless Hrc rep full system)

kevprojex wrote:
CRM bring the 916 as well ill bring my monster in and we can have a ducati

this is where you drop in that you have a S4RS or something ? prob still one of the most bonkers bikes i have ever ridden until i rode the 1098R a couple of weeks ago, now there is no place for anything that violent on public roads.
916 is undergoing a full rebuild after touching down 2 flywheels. mains are worn so after 30k its time to rebuild. shes been a good ole girl over the years, head refresh 2 years ago with new valves then last year a close one when the pulley tensioner collapsed and cam bearings. belts were trying to eat themselves. but this time its hammer time. if its not ready for the agreed date, then the rc can put in an appearance and smoke everyone out on the overrun in a closed dyno room

Any ideas on a date as I could be interested

kev mate wana trailer the bikes up together? (its 130 miles) if so id be interested as mine needs setting up