Exup bushes
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
buzzawak
- Settled in member
- Posts: 212
- Joined: Mon Apr 06, 2009 1:22 am
Exup bushes
Hi all, anyone know the dimensions (using a micrometer) of the EXUP solid bush?
This is the bush that the EXUP valve swings on. Yamaha here wants $50 each for
something worth $6. Bugger if I will pay $50.
This is the bush that the EXUP valve swings on. Yamaha here wants $50 each for
something worth $6. Bugger if I will pay $50.
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: Exup bushes
Hiya, i pressed a bit of brass pipe in mine a few years ago, its been ok since, but i cant remember what size it was. Sorry.
Cheers
Ian
Cheers
Ian
-
buzzawak
- Settled in member
- Posts: 212
- Joined: Mon Apr 06, 2009 1:22 am
Re: Exup bushes
I got around to taking off the exup valve bushes yesterday. Looks like a carbon bush and also has a dust seal on the outside.
The size for future reference is ID 10mm x OD 17mm x 7mm
Question, what would be the best way to get the inside bush out of the exup housing?
The size for future reference is ID 10mm x OD 17mm x 7mm
Question, what would be the best way to get the inside bush out of the exup housing?
Morespeedvicar wrote:Hiya, i pressed a bit of brass pipe in mine a few years ago, its been ok since, but i cant remember what size it was. Sorry.
Cheers
Ian
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: Exup bushes
Hi, i dont think the one in the exup housing is bushed (mine wasnt worn that end), i just pressed the pipe in the ceramic bush in the cable end.
Cheers
Ian
Cheers
Ian
-
buzzawak
- Settled in member
- Posts: 212
- Joined: Mon Apr 06, 2009 1:22 am
Re: Exup bushes
From the parts listing the same bush is used at both ends.Morespeedvicar wrote:Hi, i dont think the one in the exup housing is bushed (mine wasnt worn that end), i just pressed the pipe in the ceramic bush in the cable end.
Cheers
Ian