Modification Questions
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
LozVTR
- Settled in member
- Posts: 92
- Joined: Thu May 08, 2008 8:43 pm
- Location: Southampton
- Contact:
Re: Modification Questions
hiya,
I really like the look of those clocks, was that for the nc29 or 23?
do you have a link to the place you got them from..
I really like the look of those clocks, was that for the nc29 or 23?
do you have a link to the place you got them from..
-
razortooth
- Site Supporter
- Posts: 44
- Joined: Tue Apr 29, 2008 8:52 pm
- Location: Frankfurt, Germany
- Contact:
Re: Modification Questions
It was for my NC29-CBR6RR conversion.LozVTR wrote:hiya,
I really like the look of those clocks, was that for the nc29 or 23?
You can get them here - the shop where i got them won't sent to GB.do you have a link to the place you got them from..
My will may be weak, but my backbone is strong
House MD
House MD
-
LozVTR
- Settled in member
- Posts: 92
- Joined: Thu May 08, 2008 8:43 pm
- Location: Southampton
- Contact:
Re: Modification Questions
just did abit of research and theres a company on ebay who will deliver them for £170
apparently its a universal kit so will work on any bike.
apparently its a universal kit so will work on any bike.
-
razortooth
- Site Supporter
- Posts: 44
- Joined: Tue Apr 29, 2008 8:52 pm
- Location: Frankfurt, Germany
- Contact:
Re: Modification Questions
Yes it is. If you have any questions about the wiring - ask meLozVTR wrote: apparently its a universal kit so will work on any bike.
My will may be weak, but my backbone is strong
House MD
House MD
-
zul_cbr
- Settled in member
- Posts: 199
- Joined: Mon May 26, 2008 1:39 am
- Bike owned: 1990 CBR400RR-L NC29
- Location: Malaysia
- Contact:
Re: Modification Questions
thanks mate!!razortooth wrote:I cut all the bulbs of the original wireloom and soldered it with the wires of the new speedo.zul_cbr wrote: is there any modifications needed to the wiring ?
Looks like this:
i'm hunting for mine!
-
dolby
- Settled in member
- Posts: 7
- Joined: Wed May 28, 2008 6:29 pm
Re: Modification Questions
Hi Guys
Thanks for the info, I got a pair of shorty Pazzo levers with the brake res still attached. The res is for a CBR6 so will have to see if the brake lines fit. Does anyone on here know?
The digi clocks look the nuts will have a look at them later. Cheers again guys
Thanks for the info, I got a pair of shorty Pazzo levers with the brake res still attached. The res is for a CBR6 so will have to see if the brake lines fit. Does anyone on here know?
The digi clocks look the nuts will have a look at them later. Cheers again guys
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: Modification Questions
1 question.....
on NC29s the red zone on RPMs starts at 14500 and ends 16.5K
most all digi clocks i have looked at dont go near that. now i dont often hit the red zone, but do like to know when i get near it.
one set i found ACER clocks let you program/set the red zone in.
what happens when you hit that on your set?
on NC29s the red zone on RPMs starts at 14500 and ends 16.5K
most all digi clocks i have looked at dont go near that. now i dont often hit the red zone, but do like to know when i get near it.
one set i found ACER clocks let you program/set the red zone in.
what happens when you hit that on your set?