Rearset sizes ..

castrol101 · Post by **castrol101** » Sun Jun 15, 2008 7:22 pm

Does anybody know if rearsets from an NC30 will fit an NC24??
Or if the pegs are the same size/fitting??

Im looking at getting some new as mine are looking worn but I can't find any specific to NC24

Any help appreciated :)

Post by **Cammo** » Mon Jun 16, 2008 12:48 am

I doubt it, best bet might be to get someone to measure the distance between the mounting holes.

The pegs will most likely be interchangeable.

randallbass · Post by **randallbass** » Mon Jun 16, 2008 7:42 am

mounting holes are 70mm on an 1992 nc30 :)
cheers Tim

castrol101 · Post by **castrol101** » Mon Jun 16, 2008 9:14 am

Thanks Tim, I'll have a look at mine later.

castrol101 · Post by **castrol101** » Mon Jun 16, 2008 9:16 am

mounting holes are 70mm

Do you mean 7mm

randallbass · Post by **randallbass** » Mon Jun 16, 2008 12:35 pm

pretty shore the holes are 9mm for an 8mm bolt, i meant 70mm hole centers :)
cheers Tim

Rearset sizes ..

Rearset sizes ..

Re: Rearset sizes ..

Re: Rearset sizes ..

Re: Rearset sizes ..

Re: Rearset sizes ..

Re: Rearset sizes ..