NC30 Oil Filter - Will this fit?

[IanP]

Hi,

I tried to buy an oil filter from honda today. But they told me that they didn't do 15010-MW0-000 any more and he told me the following part would fit although its a smaller filter 15410-MCJ-505.

Is this ok to use?

Thanks

[CMSMJ1]

Probably - I use a filter for a fazer on my NC30 as it is stumpy and I need the clearance.

The screw on section and the footprint of it on your sump should be the same..

[Cammo]

Yeah a honda dealer told me that they have changed the size of these filters recently (and part number).

Probably to save a few yen...

[SWIFT]

Hi, Guys ('n' Gals!),
This part number changed some while ago, I've used three so far and I have had no trouble, and being smaller, find they're a tad easier to wangle into place.
Mind you, as good or bad as other makes or alternatives may be, and no matter how much cheaper, I never use other than O.E filters on anything.
I refuse to risk my engines to find out they're no good !!
At less than a tenner including a new washer, is it really worth it?
Ride Safe -
"SWIFT"

[Neosophist]

15410MCJ505 is the correct part #, it superceeds 15410MCJ003 and 15410MCJ000

As well as fitting the NC2x's/3x's it fits.

CB1300A5
CB1300SA5
CBF1000A6
CBF1000A7
CBF1000A8
CBF600N4
CBF600N5
CBF600N6
CBF600NA4
CBF600NA5
CBF600NA6
CBF600SA
CBF600SA4
CBF600SA5
CBR1000RR4
CBR1000RR5
CBR1000RR6
CBR1000RR7
CBR1100XX2
CBR1100XX3
CBR1100XX4
CBR1100XX5
CBR1100XX6
CBR600RR3
CBR600RR4
CBR600RR5
CBR600RR6
FJS600A3
FJS600A4
FJS600A5
FJS600A6
GL18006
GL18007
GL1800A2
GL1800A3
GL1800A4
GL1800A5
NT700V6
NT700V7
NT700VA6
NT700VA7
SH300A7
ST13002
ST13004
ST1300A2
ST1300A4
ST1300A6
VFR8003
VFR8004
VFR8005
VFR8006
VFR800A3
VFR800A4
VFR800A5
VFR800A6
VT750C27
VT750C4
VT750C5
VT750C6
VT750CA6
VTX1300S3
VTX1300S4
VTX1300S5
VTX1300S6
VTX1300S7
VTX1800C15
VTX1800C16
VTX1800C17
VTX1800C2
VTX1800C3
VTX1800C4
XL1000V2
XL1000V3
XL1000V4
XL1000V5
XL1000V6
XL1000V7
XL1000VA4
XL1000VA5
XL1000VA6
XL1000VA7