DOES ANYBODY HAVE.........?

[cagiva996]

Any 3tj braided brake hoses(front and rear) and a chain guide rubber(that sits above and below the front of the swingarm) the lines i had left over from my old v-raptor dont fit the blue spot calipers which i thought they would.ive also got a few tj bits that i dont need so could poss do a trade if ya likes-let me know!!!

[fzrtim]

Hi, I have been making my own brake hoses for years. If you look on ebay at aeroquip you can get the banjo fittings and the hose as long as you wish. They are compression olive fittings which means they are reusable! The banjos are about £3 each. Not had to buy any hose as i found a load of it which was once destined to be fitted on a phantom jet
You might find that using these fittings, you can modify the braded hoses you already have by changing the banjos at caliper end and therefore you will only need half the fittings

[clarkee]

The chain guides are not that dear from the Yamaha dealer, bought one recently cant remember exactly how much.

[Evilchicken0]

Ha Ha ... he said Banjo

[cagiva996]

Ordered a chain guide from fowlers (£22.00) today so sorted with that.i made up the brake lines on my old v raptor so they fitted the brembo m/c i bought for it(i put it back to standard when i sold it) so i could just change the fittings on the old v-rap hoses to fit the blue spots-cheers tim,sometimes you cant see the wood for the trees!!!!.

[Evilchicken0]

Ha Ha he said Wood