NC30 Dog bone Mod, Urgent!!!!!

[Spike16]

Urgently need, tried doing a search but not much found

how far down the original dog bone should I drill the new hole?

need to do this today as Il hopefully be at oulton tomorrow and dont want to be decking the fairing out again

[CMSMJ1]

mate, seeing as it is my fault due to lack of postage skills... I'll post these pics for you.

Cammo knows the answer>> My recall is that it is 8mm? You end up with a slot rather than 2 seperate holes.





Hope this helps dude..

[Spike16]

slot? shit so wont the dogbone move about in the slot?

got a pic of a modded one

[Cammo]

Cammo knows the answer>> My recall is that it is 8mm? You end up with a slot rather than 2 seperate holes.

Who me?!

8mm is correct.

You do end up with a slot. Best to weld up the old hole and drill a new as they do overlap a smidge.

[Spike16]

no time to weld, is it ok to run with this slot? or will the triangle thing move about in the slot

[hunter]

This what you want spike,

http://www.400greybike.info/newforum/vi ... =24&t=5346" onclick="window.open(this.href);return false;

[CMSMJ1]

If you imagine drilling 8mm from the centre of the original hole you'll get a hole with one edge missing (form the other hole)

It "may" be fine, as I am sure that only a few people have welded it up. If you want, you could go for a 10mm hole for even more ride height..and avoid drilling into the other hole.

I have no pics to hand..I'll see if I can find one.

@ Stickshift..yeah you!

[Spike16]

no time, Iv adjusted the chain so its giving max ride height but not drilled dog bone

[Cammo]

Spike, try and get it done for next time out.

It changes the handling for the better and also the shock if you have a standard one. In standard form nc30's drag their arse way to low to the ground for decent tip in on the track.