HELP!! Vacuum Feed Problem

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Cue_147
Settled in member
Posts: 24
Joined: Fri Oct 10, 2008 1:17 pm
HELP!! Vacuum Feed Problem

Post by Cue_147 »

Can someone help me. Where does the vacuum feed go on the carbs.

Could I pm someone my number and they talk me through it?
Last edited by Cue_147 on Thu Jul 16, 2009 8:41 am, edited 1 time in total.
Top
User avatar
EsKee
Site Supporter
Site Supporter
Posts: 40
Joined: Sat Mar 21, 2009 1:37 pm
Location: Kent
Re: HELP

Post by EsKee »

you mean the vacuum line to your fuel tap ?? if so, it doesn't connect to your carbs . . . there's a nipple screwed into the intake manifold on cylinder No.4 (rear/right nc30) . . .
Top
Cue_147
Settled in member
Posts: 24
Joined: Fri Oct 10, 2008 1:17 pm
Re: HELP

Post by Cue_147 »

Ah yes that's what I mean.
Is that as your sat on the bike. Closest right or left?
Top
Saveris
Settled in member
Posts: 18
Joined: Fri Jun 26, 2009 4:50 pm
Bike owned: sc57, nc30
Location: Riga, Latvia
Re: HELP

Post by Saveris »

see http://www.400greybike.info/newforum/vi ... 24&t=11016, my post with pictures
Top
Cue_147
Settled in member
Posts: 24
Joined: Fri Oct 10, 2008 1:17 pm
Re: HELP

Post by Cue_147 »

Cheers for that the bike is running :D. I just got a few little niggles to iron out over the weekend. Indicators are intermittent, rev dial is trying to go backwards and it doesn't idol correctly only stays running with full choke.
Top
The Hamster
Settled in member
Posts: 235
Joined: Wed Apr 22, 2009 2:10 pm
Re: HELP

Post by The Hamster »

Did you not read the full fiting instructions i sent you with the new Fuel Tap and vacuum hose? LOL
Top
Cue_147
Settled in member
Posts: 24
Joined: Fri Oct 10, 2008 1:17 pm
Re: HELP

Post by Cue_147 »

Yes but I couldn't find the vacuum thing but did in the end. Thanks.
Top
Post Reply

Return to “Honda - Workshop”