nc30 calipers - external torx size?

m6rk · Post by **m6rk** » Mon Jun 29, 2009 10:33 am

can anyone tell me what is the size socket i need for the external torx bolt that holds the caliper halves together?

many thanks :)

Post by **CMSMJ1** » Mon Jun 29, 2009 10:34 am

I know I used a 10mm std socket on mine...

Post by **Neosophist** » Mon Jun 29, 2009 12:36 pm

CMSMJ1 wrote:I know I used a 10mm std socket on mine...

I thought they were 12mm? Or do I have NC24 bolt sizes mixed up

However, I think he means to split them apart?

It's big-ish.. T30 or T40.

I don't have a caliper on hand but i'll check later if your still stuck...

Post by **CMSMJ1** » Mon Jun 29, 2009 12:46 pm

I do mean to split them, not the mounting bolts..
I'll go check in a bit

Post by **Neosophist** » Mon Jun 29, 2009 8:20 pm

CMSMJ1 wrote:I do mean to split them, not the mounting bolts..
I'll go check in a bit

Ooohh!

Im sure the ones on my bike have a Torx as the one had been stripped :S

Post by **CMSMJ1** » Mon Jun 29, 2009 8:55 pm

Mine have Torx too...but am sure I got them off with a 10mm socket last time.. I have not had chance to go and check but I am putting my bike away in a bit so I'll check it out..

Post by **Cammo** » Mon Jun 29, 2009 11:45 pm

Pretty sure I use a 12mm 6 point torx.

Hmm, you might be able to get them with a 10mm socket, never tried.

Post by **CMSMJ1** » Tue Jun 30, 2009 7:43 am

Yes, it is a 6 point 10mm socket I have used. Checked it last night.. slightly loose...but when nothing else is to hand

m6rk · Post by **m6rk** » Tue Jun 30, 2009 2:46 pm

external torx bits are measured with E[size]

ie

1/4" Drive E4 E5 E6 E7 E8
3/8" Drive E10 E11 E12 E14
1/2” Drive E16 E18 E20 E22 E24

any idea what the correct E number is as the socket is only £3.49 each down my local motor factors.. i'm guessing an e10?

Post by **Neosophist** » Wed Jul 01, 2009 3:36 am

Nah there bigger than that!! E10 is tiiiny.

Why not take the caliper down the factors and match up a socket?

nc30 calipers - external torx size?

nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?

Re: nc30 calipers - external torx size?