another rev counter problem

Post by **mo haggs** » Mon Jun 08, 2009 2:23 pm

ok, so i bought a shift light of r.o. and fitted it to the bike and programed it as detailed in the instruction sheet that came with it.

if you want it to light up at 10,000rpm you hold the revs at 5,000rpm and press the program button for less than 1 second.

i want mine to light up at 15,000rpm so i held the revs at 7,500rpm and pushed the button job done..........not quite.

when i took the bike for a run it didn't light up at all, so i held the revs at 7,000rpm and pushed the button.
on the second run it lit up somewhere between 12,000rpm + 13,000rpm

culd it be that the rev counter is out of calabration? any suggestions?

Post by **Neosophist** » Mon Jun 08, 2009 9:43 pm

maybe the rev counter doesn't support lighting up at 15,000 rpm? i'd get in touch with Rick, see what he has to say.

Post by **mo haggs** » Tue Jun 09, 2009 7:57 am

the light takes a reading of the coil (like a scitsu rev counter) so its indipendent of the rev counter

Post by **mo haggs** » Tue Jun 09, 2009 11:44 am

mo haggs wrote:(like a scitsu rev counter)

hmmm.

does any one run a scitsu?
if so what coulor is the dot on the back of the rev counter?

another rev counter problem

another rev counter problem

Re: another rev counter problem

Re: another rev counter problem

Re: another rev counter problem