HELP!!! Nc23 In need
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
swith30060181
- Settled in member
- Posts: 6
- Joined: Tue May 05, 2009 2:33 am
HELP!!! Nc23 In need
I posted today about my honda cbr nc23 making a ticking/crunching noise in gearbox. Now i took all my fairing off and took apart airbox and carb had a look. I saw my exhaust manifold was loose...now that stopped the rattle :d only one problem left...i think i moved the idle speed screw or thats what i think it was? now the bugga wont start :'( any ideas gratfuly welcomed thanks nick
-
greggo
- Site Supporter
- Posts: 444
- Joined: Wed May 14, 2008 1:08 pm
Re: HELP!!! Nc23 In need
Idle adjsut screw sits in the middle of the carbs and has a long flexible cable and knob attached to it (On the nc29 anyway...)
Any chance you can take a piccie? If all you did was adjust the idle, it should not be a bother to adjust back.
Check you haven't kinked a fuel hose or something when reassembling too.
Any chance you can take a piccie? If all you did was adjust the idle, it should not be a bother to adjust back.
Check you haven't kinked a fuel hose or something when reassembling too.