exup setting 3tj 400rrsp
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
matfzr400rrsp
- Settled in member
- Posts: 42
- Joined: Wed Jun 04, 2008 1:47 pm
exup setting 3tj 400rrsp
anyone know where to set the little arm to on the exhaust exup valve? aint got a decent manual so ive just set it to where i thought.
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: exup setting 3tj 400rrsp
As you look at the pulley there's a hole at 9 Oclock .... stick a metal pin or small bolt between the two tougues and into the hole. Adjust the cables to finger tightness only ... and remove the pin 
Turn the ignition on to check the exup opens and closes properly
Turn the ignition on to check the exup opens and closes properly
-
matfzr400rrsp
- Settled in member
- Posts: 42
- Joined: Wed Jun 04, 2008 1:47 pm
Re: exup setting 3tj 400rrsp
thought so, thats what ive done it to. thanks evil