Idle misfire after refit
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
emto
- Settled in member
- Posts: 116
- Joined: Wed Apr 30, 2008 4:17 pm
Idle misfire after refit
After replacing the carb rubbers on my 30, adding a .5mm shims to the needles & replacing the plugs, the bike has developed a misfire on idle.(popping) The carbs were balanced before replacement and are well seated. (much cursing)
Any ideas, it seems to be running fine otherwise.
PS I've got a small air leak from the can but this never caused a problem before.
Any ideas, it seems to be running fine otherwise.
PS I've got a small air leak from the can but this never caused a problem before.
-
Spike16
- Site Supporter
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: Idle misfire after refit
could be the extra shim in the needle makeing the bike too rich down low, if it was fine before why did you change it?
-
emto
- Settled in member
- Posts: 116
- Joined: Wed Apr 30, 2008 4:17 pm
Re: Idle misfire after refit
I was trying to improve the midrange, which it did.
-
wullvfr
- Site Supporter
- Posts: 1027
- Joined: Wed Apr 30, 2008 8:40 pm
- Bike owned: zx9r c1
- Location: killin,scotland
Re: Idle misfire after refit
what exhaust system are you running?
william
william
please,god,....give me the chance to prove that winning the lottery won't spoil me!!!
-
emto
- Settled in member
- Posts: 116
- Joined: Wed Apr 30, 2008 4:17 pm
Re: Idle misfire after refit
The exhaust is a 1/2 Ethos system, jetted at 118f / 120r, A/F screws at 2.25 out