NC35 fork to NC29

[PARUS]

Hi,

Always hear that NC35 forks is too short for NC29. But found following conversion

.

Maybe somebody know owners of this.

[garyboy_palaboy]

.


i think that the forks of the NC35 will work...my friend of mine told me that they were able to install a NC35 forks to a NC29 with no problems...



.

[chrisja2]

The guys who races the bike is Col, ping him an email. Although i know hes a very busy chap!

[mrdidlydingo]

Parus, the forks do drop the nose a little but that was fine for me the bike handles very similar to previous once you match up the settings on the rear shock, the brakes are far better.

To convert you will need to swap the stem for your CBR one in the bottom yoke and alter the lockstop position otherwise it'll pretty much be a straight line machine !

Other than that its fairly straightforward if its for a road bike you will need to look at re routing some cabling but nothing that can't be easily overcome.

You'll need NC35 Forks, Yokes, Clip ons, calipers, spindle & spacers

[CMSMJ1]

The guys who races the bike is Col, ping him an email. Although i know hes a very busy chap!

Username on here is Yeurman I believe.

Tasty bikes...