Still cant start it

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
gsxr400 racer
Settled in member
Posts: 179
Joined: Wed Apr 30, 2008 8:35 pm
Location: usa
Contact:
Re: Still cant start it

Post by gsxr400 racer »

look at the rotor that passes by the pick up that is the difference :fight:
jamierooney
Settled in member
Posts: 58
Joined: Mon Mar 23, 2009 12:23 pm
Location: mayo, ireland
Re: Still cant start it

Post by jamierooney »

gsxr400 racer wrote:look at the rotor that passes by the pick up that is the difference :fight:
yu mean in terms of the distance between the rotor and the pickup? a bit hard to see both in operation since the pickup is held on the casing!
M1KE
Settled in member
Posts: 141
Joined: Fri May 02, 2008 6:45 pm
Re: Still cant start it

Post by M1KE »

Just measure the distances between the centre of the casing and the pickup that'll show you if its different.
gsxr400 racer
Settled in member
Posts: 179
Joined: Wed Apr 30, 2008 8:35 pm
Location: usa
Contact:
Re: Still cant start it

Post by gsxr400 racer »

the rotor is visibly different
jamierooney
Settled in member
Posts: 58
Joined: Mon Mar 23, 2009 12:23 pm
Location: mayo, ireland
Re: Still cant start it

Post by jamierooney »

yea - i know their different, but could use some context to understand how this is a solution?
Have been looking at making better earth connections between the engine and frame this evening, and its producing much better sparks....
next step is to rejuvenate all the engine/frame mount points to clean em up and help a better earth connection from the plug returning toward the battery.
Willll update with the results tomorro.
jamierooney
Settled in member
Posts: 58
Joined: Mon Mar 23, 2009 12:23 pm
Location: mayo, ireland
Re: Still cant start it

Post by jamierooney »

well cleaning off the engine mounts did the trick for the spark - sorted on every crank....

Post Reply