Tacho not working
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Harreh
- Settled in member
- Posts: 4
- Joined: Wed Nov 19, 2008 10:27 am
Tacho not working
Hi guys,
All of a sudden my tacho stopped working, same time a lot of my dash bulbs went, I replaced most of the dash bulbs but I'm still having issues with the tacho, all the wiring is in check and the bike rides fine.
Is there anyway I can test the tacho?
All of a sudden my tacho stopped working, same time a lot of my dash bulbs went, I replaced most of the dash bulbs but I'm still having issues with the tacho, all the wiring is in check and the bike rides fine.
Is there anyway I can test the tacho?
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Tacho not working
Check out all of the bike's earths: 1 from the negative battery terminal to the frame, and also one of the coils to the frame.
The tacho also has an earth wire screwed to the back of it with a tiny bolt, check that out also.
The tacho also has an earth wire screwed to the back of it with a tiny bolt, check that out also.
"It's just a ride" Bill Hicks
-
Harreh
- Settled in member
- Posts: 4
- Joined: Wed Nov 19, 2008 10:27 am
Re: Tacho not working
Think you just nailed it mate, I only saw 2 wires going into it!
Cheers bud!
Cheers bud!