A few general Q's

[iron chef]

First of all, appologies if these have been done before. They are all to 'general' to pick up anything with search.

few interchangability questions:

1. Whats needed to put VFR fairings on an RVF?

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

Cheers peeps,
Matt

[viper_biker]

1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

[iron chef]

Thanks for your reply!

As for the bodywork, i have found a reasonable set of 2 piece VFR race glass. Thought that it would be a good buy if it was easy to do

And thats a shame about the swing arm because the only rvf swingers i can find seem to be (in my eyes) well over priced, is 80£ really what they normally go for?

Thanks again,
Matt

[viper_biker]

£80 for a bare swinger is a lot, although if it is inclusive of hub, sprocket, disc or tri-piece and dogbones £80 isn't so bad.

[vfrman]

1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

You drunk mate?

[viper_biker]

PMSL, pretending to work and being on the internet will get me in trouble one of these days LOL But I think I got the message accross.

[CMSMJ1]

1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

You drunk mate?

LMAO = I thought that he was talking in code..

Things being diggerent and swatting losers..lol

[Neosophist]

The NC21 wheel would be interesting... 16'er albeit 100/90/60 :/