m-max limiter cut for FZR400R

fujigas1 · Post by **fujigas1** » Thu Jan 01, 2009 9:26 pm

Hi All.
New to the site but just wondered if anybody had an English wiring diagram for the M-Max digital limiter cut. I have one for my FZR but the diagram is in Japanese! There's only 4 wires 2 red/blue and 2 green/blue, anybody know where they go to?
cheers
fujigas1

Post by **Evilchicken0** » Thu Jan 01, 2009 11:31 pm

In the back of the speedo. You need to take the top fairing off then the clocks. you'll find the loom connects to the speedo, unplug it and plug the M-Max into the loom instead.
You'll be able to go over 180kmh (112mph) .... on private roads and racetracks

Post by **wullvfr** » Fri Jan 02, 2009 12:01 am

Evilchicken0 wrote:You'll be able to go over 180kmh (112mph) .... on private roads and racetracks

very law abiding

william

fujigas1 · Post by **fujigas1** » Fri Jan 09, 2009 8:31 pm

Hi
cheers for the reply and info, I'll check out the back of the clocks. I was under the impression that's were it went but was a little foxed as the japanese instructions have a diagram, but it shows the under seat area of the battery and cdi area, so I then presumed it was ment to go around this area.

I take it the M6 an M62 are private roads then??

Post by **Evilchicken0** » Sat Jan 10, 2009 11:52 am

Ah - yes ... I do remember theres an M-Max that does go under the seat ... but I don't remember how.

Maybe scan the instructions and post them up ???

fzrtim · Post by **fzrtim** » Sun Jan 11, 2009 10:41 pm

I cant believe theres still some fzrs out there that arent deristricted!
You could just take the easy option and fit a mph converter.

plodder · Post by **plodder** » Tue Jan 13, 2009 12:27 pm

I took mine out to see the effect. It jolts the bike horribly when it cuts in, so it went back in.

Marb · Post by **Marb** » Sat Feb 21, 2009 11:43 am

Evilchicken0 wrote:Ah - yes ... I do remember theres an M-Max that does go under the seat ... but I don't remember how.

Maybe scan the instructions and post them up ???

Have you sorted this? I have a underseat derestrictor, could post some pics if your interested?

Sun Feb 22, 2009 9:35 am

Hi

Or you can buy this little number it fits the 3tj but not 1wg's and it lets you run the bike with out the exup motor only....

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :middle:uk" onclick="window.open(this.href);return false;

But I agree fit a mph gold converter to the bottom of the speedo drive for the blue one will fit to tight at the top.

Good Luck !!!

m-max limiter cut for FZR400R

m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R

Re: m-max limiter cut for FZR400R