fitting a slip on exhaust

Post by **scratchin** » Fri Jan 30, 2009 9:11 pm

just wondered if anyone knows if i cut the bolt on part of the exhaust off will a 2 inch slip on can fit straight on??

Post by **tanuki** » Fri Jan 30, 2009 9:23 pm

Yes or you could buy an adaptor which means you don't have to cut anything

Post by **chrisja2** » Sat Jan 31, 2009 9:41 am

I cut mine off and fitted a slip on blue flame end can on (see members bikes for pic) Also i bought an adaptor off greame france which allows me to fit the original 3 bolt end can back onto the cut pipe for mot purposes.
He could always buy your micron end can off you Billy! :)

Post by **tanuki** » Sat Jan 31, 2009 9:38 pm

Yes..... Yes he could and a very astute purchase it would be at Â£60 delivered.

rob · Post by **rob** » Sat Jan 31, 2009 11:53 pm

how much are the GF adapters

Post by **lazcbr29** » Sat Jan 31, 2009 11:58 pm

tanuki
wot type of can is it?
stainless?
cheers
laz

Post by **chrisja2** » Sun Feb 01, 2009 10:07 am

Rob, the slip-on to 3 bolt stainless stell adaptor was i think about Â£26 + pp off GF. Im in Hucknall if you fancy a look at one, might even sell mine now i have a road legal can.

Chris.

rob · Post by **rob** » Sun Feb 01, 2009 4:47 pm

cheers Chris, will give you a shout towards next weekend if thats ok with you.

Post by **chrisja2** » Sun Feb 01, 2009 9:25 pm

Yep no problemo.

fitting a slip on exhaust

fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust

Re: fitting a slip on exhaust