Turn light problem

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
dinv4
Settled in member
Posts: 14
Joined: Mon Sep 29, 2008 2:16 am
Turn light problem

Post by dinv4 »

Hi all .....my '91 nc30 having problem with turn light.Already change new turn signal relay,but still not OK.When press button,the light always ON and not blinking.Any suggestion??
Simon_Ed
Site Supporter
Site Supporter
Posts: 246
Joined: Thu May 22, 2008 8:04 pm
Contact:
Re: Turn light problem

Post by Simon_Ed »

check your bulbs
ryancusick
Settled in member
Posts: 34
Joined: Thu Jun 26, 2008 11:43 pm
Location: Belfast, N.I.
Contact:
Re: Turn light problem

Post by ryancusick »

Sounds more like its wired wrong. Check the wires in different ways.
dinv4
Settled in member
Posts: 14
Joined: Mon Sep 29, 2008 2:16 am
Re: Turn light problem

Post by dinv4 »

ryancusick wrote:Sounds more like its wired wrong. Check the wires in different ways.
Hi.how to check the wire different ways???
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: Turn light problem

Post by Cammo »

Does the front and the back indicators both stay on?

Have they ever worked properly?

Take off the seat unit and check the wiring under the pillion seat. All of the bullet connectors from the indicators should be plugged into corresponding coloured wires.

It sounds as though the turn relay isn't wired up properly.

Check over the wiring diagram:

http://i19.photobucket.com/albums/b171/ ... alloom.jpg" onclick="window.open(this.href);return false;
"It's just a ride" Bill Hicks
ryancusick
Settled in member
Posts: 34
Joined: Thu Jun 26, 2008 11:43 pm
Location: Belfast, N.I.
Contact:
Re: Turn light problem

Post by ryancusick »

Stickshift wrote:Does the front and the back indicators both stay on?

Have they ever worked properly?

Take off the seat unit and check the wiring under the pillion seat. All of the bullet connectors from the indicators should be plugged into corresponding coloured wires.

It sounds as though the turn relay isn't wired up properly.

Check over the wiring diagram:

http://i19.photobucket.com/albums/b171/ ... alloom.jpg" onclick="window.open(this.href);return false;
What he said, just pull the bullet connectors out and plug them in different combinations. On the RVF there are three females and only two coming from the aftermarket indicators.

Post Reply