urgentish nc29 query

badbannedbiker · Post by **badbannedbiker** » Tue Jan 13, 2009 8:16 am

hi everyone and thanks in advance, my question is will removing the instruments (revcounter, idiot lights, speedo etc) make my nc29 misfire, stutter etc at higher revs about 6-7k i think, can.t tell for sure without the revcounter? Nothing else has been touched. Thanks in advance

Post by **tanuki** » Tue Jan 13, 2009 8:47 am

Yes the restiction circuit is in the speedo, so removing this will cause the bike not yo rev past 6-7K

badbannedbiker · Post by **badbannedbiker** » Tue Jan 13, 2009 9:10 am

is there a way to bypass this without refitting the clocks? Thanks

Post by **wullvfr** » Tue Jan 13, 2009 9:44 am

i think you will need to remove the restriction switch from the clocks but keep it plugged in,tape it up so water doesn't get in and damage it,this would cause the bike to misfire if it got water in it etc!!!

your other option is de-restricting the bike by means of fitting a de-restrictor cdi.

william

badbannedbiker · Post by **badbannedbiker** » Tue Jan 13, 2009 10:11 am

sounds like the first option is the easiest for me. Does anybody know of a how to guide of how to get to the restriction switch etc or have any pointers? Thanks again

Post by **GF Racing** » Tue Jan 13, 2009 10:54 am

How about a used tested MMAx derestriction box - simply plugs into you loom where the clock based restrictor used to be. Job done.

Â£25 delivered assuming Uk postcode.

Paypal as per email below is quickest.

badbannedbiker · Post by **badbannedbiker** » Tue Jan 13, 2009 11:26 am

i.ll take it. Paypal on the way by 12. Can you get it in the post today?

urgentish nc29 query

urgentish nc29 query

Re: urgentish nc29 query

Re: urgentish nc29 query

Re: urgentish nc29 query

Re: urgentish nc29 query

Re: urgentish nc29 query

Re: urgentish nc29 query